SWMGAMERS.com Forums https://www.swmgamers.com/forums/ |
|
Is Outlining Gambit allowed on maps for DCI events? https://www.swmgamers.com/forums/viewtopic.php?f=53&t=4210 |
Page 1 of 1 |
Author: | robdimension [ Fri Jul 25, 2008 6:30 am ] |
Post subject: | Is Outlining Gambit allowed on maps for DCI events? |
we are going to be instating the Gambit ruling shortly and I was wondering if it is permited to outline the gambit placement on maps for DCI events. I figure this would help move the game along instead of worrying if they are "in gambit". Thanks |
Author: | Boba52 [ Fri Jul 25, 2008 7:17 am ] |
Post subject: | Re: Is Outlining Gambit allowed on maps for DCI events? |
Whenever you have question regarding DCI rules in miniatures please check out the Updated DCI floor rules in the document center. http://www.wizards.com/default.asp?x=dci/doccenter/home There is nothing in the DCI floors rules that specifically states you can't add gambit areas to your maps, so the answer is- yes you can. All my maps are laminated so I don't permanently deface the map, but I do have gambit areas plotted onto transparency paper that I overlay onto the map. I found this really speeds things up. |
Author: | LoboStele [ Fri Jul 25, 2008 7:30 am ] |
Post subject: | Re: Is Outlining Gambit allowed on maps for DCI events? |
Just be careful that however you outline the area, you don't obscure any of the regular terrain lines on your map. Boba52's idea for using a transparency overlay is a really good, and very easy one. I have some clear vinyl that I purchased for pretty cheap at a Joann's Fabric store, and I drew a grid on it, then cut out the shapes for gambit zones. I got probably 5 or 6 grids out of $10 worth of material. Actually, might not have even been that expensive. The other option, if your maps are laminated, or you use one of those poster sized top-loaders, you can use a dry erase marker. Either way, as I said, just be sure you can still see all the terrain lines. The vinyl overlays that I created can block some lines sometimes depending on how it's set up, so I have to be careful and/or pay closer attention when pieces are in that area. |
Author: | Grand Moff Boris [ Fri Jul 25, 2008 9:10 am ] |
Post subject: | Re: Is Outlining Gambit allowed on maps for DCI events? |
I would advise against marking up a non-laminated map. My suggestion instead would be to get a piece of transparency or something similar and cut out a couple of gambit grids. Or you might mark the center of the map, on maps that aren't marked that way already. |
Author: | Darth Ruthven [ Fri Jul 25, 2008 9:30 am ] |
Post subject: | Re: Is Outlining Gambit allowed on maps for DCI events? |
I have all my maps laminated except the RotS hardboard, and while an expensive investment (especially since I have multiples of most of the DCI maps,) but outlining the gambit zone with a dry-erase marker has been fantastic for myself and my play group. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |