SWMGAMERS.com Forums https://www.swmgamers.com/forums/ |
|
Community Vset Fringe Project 1 Final 2 Voting https://www.swmgamers.com/forums/viewtopic.php?f=3&t=15899 |
Page 3 of 4 |
Author: | saber1 [ Fri Oct 26, 2012 11:36 am ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
Sarlacc Black Sun Slicer |
Author: | Sithborg [ Fri Oct 26, 2012 11:45 am ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
R5Don4 wrote: Sithborg wrote: Here's the thing to remember though. More traditional designs may be less interesting, but it will also be easier for the piece to make it through the design process. Scott, and any others from Tammany Hall, it would be of interest to me and I'm sure to others, if you could go into more detail on this process. We've often heard of, and play testers have seen different versions of the same design, so if you wouldn't mind elaborating on the process of going from draft to final design it would be appreciated. I think it might help the community make their choice on the two miniatures we will attempt to design as a group and give us a preview of what we can expect for the next step of this process. Once the stats are done they are sent to playtesting. At which point it is making adjustments based on playtest reports. Honestly, it is the point where I'm most hesitant about this public process. Because each designer can interpret the playtest data differently, and it has been an issue in the past to get 4 designers agreeing on changes. Sometimes it's small, sometimes it large. My involvement as a rules advisor is now more along the process, nixing the obvious issues at the start, and working on making things work as the process goes on. |
Author: | kamikaze13 [ Fri Oct 26, 2012 11:48 am ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
R5Don4 wrote: Sithborg wrote: Here's the thing to remember though. More traditional designs may be less interesting, but it will also be easier for the piece to make it through the design process. Scott, and any others from Tammany Hall, it would be of interest to me and I'm sure to others, if you could go into more detail on this process. We've often heard of, and play testers have seen different versions of the same design, so if you wouldn't mind elaborating on the process of going from draft to final design it would be appreciated. I think it might help the community make their choice on the two miniatures we will attempt to design as a group and give us a preview of what we can expect for the next step of this process. |
Author: | R5Don4 [ Fri Oct 26, 2012 12:33 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
Even direction to an old thread would be helpful. |
Author: | DarphNader [ Fri Oct 26, 2012 1:24 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
Any piece that further helps making a build with Hondo gets my vote. Arrrrh where's me credits?! More lizards = More fun!!! So 4 me its... Pirate Capin & Trandoshan Huntmaster |
Author: | DarthBane53 [ Fri Oct 26, 2012 2:56 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
My vote goes to the Sarlaac and the Ewok Catapult. To be honest nothing really appeals to me. Some people on bloomilk said sarlaac should be an epic, I can find a way to use epics in my normal games. I want a normal sarlaac. I dont even play ewoks, but a catapult seems like fun. |
Author: | kamikaze13 [ Fri Oct 26, 2012 5:47 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
R5Don4 wrote: Even direction to an old thread would be helpful. >Like this?<
|
Author: | FlyingArrow [ Fri Oct 26, 2012 6:18 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
R5Don4 wrote: The hardest part is keeping the community involved and interested in participating in the process. When the process breaks down, the result is less than ideal. That's a great point, and reason to direct people again to this thread about how we'll handle the design process: viewtopic.php?f=3&t=15879&start=0 With this many people, nobody is going to get exactly what they want. So think about how you would want things to work so that when you don't get your way, you at least can walk away feeling like your ideas were considered fairly. I have a proposal in that thread for how things could work in the design process, to ensure that we move forward and eventually reach a final product without getting stuck in gridlock. It's the post with the timestamp Mon Oct 22, 2012 9:58 am. So far, no comments on it or other proposals. (Discussion about this should be in the other thread so this thread can stay on the topic of voting for the names.) |
Author: | kezzamachine [ Fri Oct 26, 2012 7:20 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
Pirate Captain Sarlacc Rock on! |
Author: | Azavander [ Fri Oct 26, 2012 11:38 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
Sarlacc Black Sun Slicer |
Author: | fett19 [ Sat Oct 27, 2012 8:38 am ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
+1 sarlac +1 tranny huntmaster |
Author: | AndyHatton [ Sat Oct 27, 2012 9:24 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
Weird, I thought I posted but I can't find my post. +1 Black Sun Slicer +1 Pirate Captain |
Author: | DarphNader [ Sat Oct 27, 2012 9:46 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
R5Don4 wrote: If the Slicer or the Captain make it through as the final pieces I hope we can get an alien race tacked on the front. The right alien race could really help determine the recommended mini, which we will have to decide on almost immediately. It would also help spark imaginations designing the stats. As I recall from the Zahn books... While on Bastion didn't Han and Lando enlist a certain Verpine Slicer who was a pal of Lobot? If the BS Slicer was to make it through, that might be a good racial option. |
Author: | urbanjedi [ Sat Oct 27, 2012 9:48 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
Yes Moegid was the name of the slicer. "Thrawn" cracked him because verpine always use some certain set of number combinations when they are slicing or something. |
Author: | Cerous Mutor [ Sun Oct 28, 2012 2:48 am ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
fett19 wrote: +1 sarlac +1 tranny huntmaster WTF really? |
Author: | R5Don4 [ Sun Oct 28, 2012 6:40 am ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
It's great to take from canon source material whenever possible. Perfect suggestion Gerry. |
Author: | drkjedi35 [ Sun Oct 28, 2012 12:36 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
Sarlacc +10 Ewok Catapult +7 |
Author: | FlyingArrow [ Sun Oct 28, 2012 9:39 pm ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
FlyingArrow wrote: +1 Black Sun Slicer Update: +1 Black Sun Slicer +1 Sarlacc |
Author: | UrbanShmi [ Mon Oct 29, 2012 2:53 am ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
After looking through the whole thread, my votes are: Pirate Captain Black Sun Slicer |
Author: | R5Don4 [ Mon Oct 29, 2012 5:49 am ] |
Post subject: | Re: Community Vset Fringe Project 1 Final 2 Voting |
Sarlacc Ewok Catapult |
Page 3 of 4 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |