SWMGAMERS.com Forums https://www.swmgamers.com/forums/ |
|
Lord Dragons First Crack at Customs (updated w/ New Minis) https://www.swmgamers.com/forums/viewtopic.php?f=13&t=15315 |
Page 1 of 1 |
Author: | LordDragon [ Mon Apr 09, 2012 8:49 am ] |
Post subject: | Lord Dragons First Crack at Customs (updated w/ New Minis) |
here goes my first Crack at Customs Tell me what you think. Any Suggestions would be greatly appreciated (Reposted with more customs and Better Pics) Darmin Ninner Fi Weir Ordo Jaster Revan DLOTS Lord Kaan The Huntress Admiral Saul Darth Zannah Molded Mouse Droids Atin First Crack at molding something other than a Mouse Droid Wicket...Turned out ok |
Author: | LordDragon [ Mon Apr 09, 2012 8:53 am ] |
Post subject: | Re: Lord Dragons First Crack at Customs |
More Customs |
Author: | R5Don4 [ Mon Apr 09, 2012 10:21 am ] |
Post subject: | Re: Lord Dragons First Crack at Customs |
Decent customs from what I can tell. Nice molded mice. You might want to trying photographing in front of a backdrop so the camera can tell what it is supposed to focus on. |
Author: | LESHIPPY [ Mon Apr 09, 2012 10:25 am ] |
Post subject: | Re: Lord Dragons First Crack at Customs |
the molded mouse droids look awesome. How much to make me some? |
Author: | R5Don4 [ Mon Apr 09, 2012 10:58 am ] |
Post subject: | Re: Lord Dragons First Crack at Customs |
To make mouse droids follow this tutorial: http://fasatrekker.blogspot.ca/2012/02/using-oven-baked-clay-to-make-press.html Go nuts. |
Author: | LordDragon [ Mon Apr 09, 2012 11:10 am ] |
Post subject: | Re: Lord Dragons First Crack at Customs |
For the molded mouse droids I purchased this stuff called instant mold. it is a reusable molding material. all you have to do is boil some water and pour it over the molding material to make it pliable. then work it over a mouse droid until it hardens back up. after that pull out the mouse droid and you have your mold. then I just fill it with green stuff let it harden and paint, as simple as that. If you want me to make you some just let me know. I will try to take the pictures again behind a backdrop so you can see them in detail. |
Author: | biggsy [ Wed Apr 11, 2012 1:03 pm ] |
Post subject: | Re: Lord Dragons First Crack at Customs |
Nice work, those are pretty good. I especially like Jaster and Admiral Saul. It seems you got the hang of it rather quick. And it seems you have a steady hand, which really helps with the paintjobs. Keep it up! |
Author: | LordDragon [ Wed Apr 11, 2012 7:04 pm ] |
Post subject: | Re: Lord Dragons First Crack at Customs |
Thanks my only problem now is I have run out of extra minis to do customs with. anybody have any extra commons or uncommons they want to off load??? |
Author: | LordDragon [ Wed Apr 11, 2012 7:11 pm ] |
Post subject: | Re: Lord Dragons First Crack at Customs |
biggsy wrote: Nice work, those are pretty good. I especially like Jaster and Admiral Saul. It seems you got the hang of it rather quick. And it seems you have a steady hand, which really helps with the paintjobs. Keep it up! For Jaster was a combo of two pieces (gunslinger and Datchwatch i believe) then i used the top of the gunslinger for my huntress witch was a pain to get the two pieces to line up. but she came out the best though I wasn't to pleased with how to back of her cape came out. |
Author: | LESHIPPY [ Thu Apr 12, 2012 10:47 am ] |
Post subject: | Re: Lord Dragons First Crack at Customs |
R5Don4 wrote: To make mouse droids follow this tutorial: http://fasatrekker.blogspot.ca/2012/02/using-oven-baked-clay-to-make-press.html Go nuts. thanks this will make it easy to do my own. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |