SWMGAMERS.com Forums
https://www.swmgamers.com/forums/

How to make your own Boosted-GMLS-with-Benifits!
https://www.swmgamers.com/forums/viewtopic.php?f=13&t=10343
Page 1 of 1

Author:  cremebrule [ Thu Dec 23, 2010 4:41 pm ]
Post subject:  How to make your own Boosted-GMLS-with-Benifits!

Alright, this custom thread is how to make your own, really cool, GMLS. I must admit, the old GMLS (JA; non customized) looks pretty stupid. I mean, he has a lightsaber hilt but no activated lightsaber!! :fight:

Here's how to do it!

To make this (BEAST!!) custom, you do NOT need...:

-Paint
-Modeling Putty
-Any VR pieces
-Experience (This is literally like a 4-step custom lol)

What you DO need is:

-Superglue
-Xacto knife
-Clothes Pin
-Paper Clip (Use it to spread out the superglue)
-Tools(?)
-Scratch piece of cardboard as a "knifing" surface so you don't scratch your table or whatever while working
-x1 Grand Master Luke Skywalker
-x1 Youngling
-x1 Lumiya, the Dark Lady

OK. Here's what you do. First, take your Youngling and cut off his lightsaber (no need for the top part of the hilt...just the blade), like so (sorry, there's two problems with the picture below. One, i accidently cut the hilt off, and two, there's no lightsaber in the picture. I didn't think i'd be making a tutorial of this but he [the finished product] was so awesome i couldn't help but make a tutorial for him!!) :

Image

Now, glue the lightsaber to the end of luke's hilt. You might need to cut an angle at the base of the blade of the lightsaber to get the correct angled look. See below (different angled pics):

Image

Image

Image

Place him aside to dry. Take Lumiya out now and cut off her lightwhip:

Image

Now, cut her lightwhip in half. Cut it about where the lightwhip starts to turn towards itself, if not a little before:

Image

Take the smaller part of the lightwhip that you just cut (the lower half) and flip it. i.e.: the "cut" side of that piece is now downwards, not upwards anymore. Now glue the lightwhip piece to luke's hand (you may need to cut the piece and the end of it so it fits snugly in the palm of his hand). Make sure you're gluing the "handle" part of the lightwhip to the palm of his hand, not the bigger part, lol...if you've followed these steps correctly, you've done it! You've created an awesome looking GMLS who has both an ignited lightsaber AND casting electric judgement on some unlucky victim! Here's my finished pics below:

Image

Image

Image

Image

Image

...and here's a scenario picture of Luke "lighting up" a clone trooper. Sadly they're not in the same era, but who cares, anyways? :P

Image



So what'ya think? Do you like it? Have you made your own GMLS custom fig? (if so, post it here!!).

Question/Comments please!! :)

:maul:

Author:  yuuzhanvong [ Sat Dec 25, 2010 9:47 pm ]
Post subject:  Re: How to make your own Boosted-GMLS-with-Benifits!

awesome. YOU SICK MONKEY! lol :Anniepilot:

Author:  Demosthenes [ Sun Dec 26, 2010 12:45 am ]
Post subject:  Re: How to make your own Boosted-GMLS-with-Benifits!

I did half of what you did, a few months back. Cut the lightsaber off a Youngling and gave it to GMLS and VOILA! A Grandmaster actually holding a lightsaber, lol.

Author:  kamikaze13 [ Sun Dec 26, 2010 2:24 pm ]
Post subject:  Re: How to make your own Boosted-GMLS-with-Benifits!

The lightning is pure genius.

Author:  wannabemexican [ Sun Dec 26, 2010 5:51 pm ]
Post subject:  Re: How to make your own Boosted-GMLS-with-Benifits!

I may dig out one of my younglings and do this...I think it is awesome.

Author:  LoboStele [ Mon Dec 27, 2010 8:33 am ]
Post subject:  Re: How to make your own Boosted-GMLS-with-Benifits!

Yep, the youngling trick was one of the first things I did to my GMLS. ;)

The Lumiya light whip is very brilliant though.

Author:  cremebrule [ Mon Dec 27, 2010 5:14 pm ]
Post subject:  Re: How to make your own Boosted-GMLS-with-Benifits!

Thanks! :D Yea, the youngling trick i think is a pretty obvious one...i think. The lightning whip i thought while i was doing the custom, LOL. I'm pretty amazed myself how good the whip actually looks on GMLS. O.O

Author:  Jedi Christian [ Tue Dec 28, 2010 8:16 pm ]
Post subject:  Re: How to make your own Boosted-GMLS-with-Benifits!

Pretty cool.

Author:  cremebrule [ Wed Dec 29, 2010 4:32 pm ]
Post subject:  Re: How to make your own Boosted-GMLS-with-Benifits!

Jedi Christian wrote:
Pretty cool.


Thanks! :)

Author:  kamikaze13 [ Mon Jul 11, 2011 11:04 pm ]
Post subject:  Re: How to make your own Boosted-GMLS-with-Benifits!

No more "How to make your own..."? :(

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/